Curriculum Vitae

Jonathan E Clark

August 30, 2013

General Information

University address:	Mechanical Engineering
FAMU-FSU College of Engineering
2525 Pottsdamer Street B-348
Florida State University
Tallahassee, Florida 32310
Phone: (850)410-6608; Fax: (850)410-6337

E-mail address:	clarkj@eng.fsu.edu

Web site:	http://www.eng.fsu.edu/me/people/clark.html

Professional Preparation

2004	Ph.D., Stanford University. Major: Mechanical Engineering. 

2000	M.S., Stanford University. Major: Mechanical Engineering. 

1998	B.S., Brigham Young University. Major: Mechanical Engineering. 

Postdegree Education and Training

2005–2007	University of Pennsylvania, Postdoctoral researcher. 

2004	Ricoh Innovations, Incorporated, Postdoctoral researcher. 

Professional Experience

2007–present	Assistant Professor, Mechanical Engineering, Florida State University. 

Honors, Awards, and Prizes

Excellence in Teaching Award, Department of Mechanical Engineering (2013). 
Campus Challenge – Okaloosa Sword for the ARM2S Technology Roadmap, Air Force (2012). 
Excellence in Teaching Award, Mechanical Engineering (2010). 
First Year Assistant Professor Award, Florida State University (2008). 

Teaching

Courses Taught

Introduction to Robotics (EML4800)
Introduction to Robotics (EML5802)
Dynamic Systems II (EML3014-C)
Mechatronics II (EML 4930)
Mechatronics II (EML 5930)
Dynamic Systems I (EML3013-C)
Bio/Robotic Locomotion (EML4930)
Bio/Robotic Locomotion (EML5930)

Curriculum Development

Introduction to Robotics - A major redesign of the senior elective/graduate level class. Introduced a new textbook, lecture sequence, and set of Matlab and experimental labs (2013)
Mechatronics II - A new senior elective/graduate level class introducing the multidisciplinary study of electro-mechanical systems (2010)
Bio/Robotic Locomotion - A new senior elective/graduate course introducing the principles behind animal and robotic locomotion. Emphasis on the development of Matlab based dynamic simulation models (2009)

Doctoral Committee Chair

Miller, B. D., graduate. (2013). Dynamic Legged Robots for Use in Multiple Regimes: Scaling, Characterization and Design for Multi-Modal Robotic Platforms.  
Jun, J. Y., graduate. (2011). Characterization and Optimization of Running with Curved Legs.  

Doctoral Committee Member

Dunlap, D., graduate. (2011). 
Coyle, E. J., graduate. (2010). 
Yu, W., graduate. (2010). 
Henry, S. D., graduate. (2010). 
Ordonez, C., graduate. (2010). 
Bosque, E., doctoral candidate. 
Gupta, N., doctoral candidate. 
Upadhyay, P., doctoral candidate. 

Master's Committee Chair

Dickson, J. D., graduate. (2012). 
Kulinka, C. M., graduate. (2011). 
Andrews, B. S., graduate. (2010). 
Newton, J., student. (2014). 
Rivera, P., student. (2014). 

Master's Committee Member

Kanuri, S. L., graduate. (2013). 
Morton, J. T., graduate. (2012). 
Roesch, H. P., graduate. (2011). 
Hogue, J., graduate. (2011). 
Liu, F., graduate. (2008). 
Lu, L., graduate. (2008). 
Webb, J., student. (2014). 

Bachelor's Committee Chair

Bunne, M., graduate. (2012). Instantiation of LLS model Using Torque-Based Actuation.  
Newton, J., graduate. (2012). Design and Characterization of a Variable Stiffness Application for Dynamic Running Robots.  
Haldane, D., graduate. (2011). Design of a Tunable Stiffness Leg for Dynamic Running using Shape Memory Polymer.  
Dickson, J., graduate. (2010). Design of a Bio-Inspired, Dynamic Tree Climbing Robot.  
Carbiener, C., student. (2014). CRIKET: Compliant Robot with Intentional Kinetic Energy Transfer.  

Bachelor's Committee Member

Porter, S., graduate. (2010). 

Senior Design

Clark, J. E. (2008–2013). Project Advisor. 

Research and Original Creative Work

Publications

Refereed Journal Articles

Dickson, J. D., & Clark, J. E. (2013). Design of a Multi-Modal Climbing and Gliding Robotic Platform. IEEE/ASME Transactions on Mechatronics, 18, 494-505. doi:10.1109/TMECH.2012.2223708

Galloway, K. C., Clark, J. E., & Koditschek, D. E. (2013). Variable Stiffness Legs for Robust, Efficient, and Stable Dynamic Running. ASME Journal of Mechanisms and Robotics, 5, 1-11. doi:10.1115/1.4007843

Lynch, G., Clark, J. E., Lin, P. C., & Koditschek, D. E. (2012). A Bio-inspired Dynamical Vertical Climbing Robot. The International Journal of Robotics Research, 31, 974-996. doi:10.1177/0278364912442096

Miller, B., Schmitt, J., & Clark, J. E. (2012). Quantifying Dynamic Stability of SLIP- like Running Systems. The International Journal of Robotic Research, 31, 573-587. doi:10.1177/0278364912439613

Andrews, B., Miller, B., Schmitt, J., & Clark, J. E. (2011). Running Over Unknown Rough Terrain with a One- Legged Planar Robot. Bioinspiration & Biomimetics, 6, 1-15.

Schmitt, J., & Clark, J. E. (2009). Modeling Posture- Dependent Leg Actuation in Sagittal Plane Locomostion. Bioinspiration & Biomimetics, 4, 1- 17.

Clark, J. E., & Cutkosky, M. R. (2006). The Effect of Leg Specialization in a Biomimetic Hexapedal Running Robot. ASME Journal of Dynamic Systems, Measurement and Control, 128, 26-35.

Clark, J. E., KIm, S., & Cutkosky, M. R. (2006). iSprawl: Design and Tuning for High Speed Autonomous Open- Loop Running. International Journal of Robtotics Research, 25, 903-912.

Clark, J. E., & Koditschek, D. E. (2006). A Spring-assisted One Degree of Freedom Climbing Model. Lecture Notes on Control and Information Sciences, 1, 43-64.

Clark, J. E., Cham, J. G., Bailey, S. A., Full, R. J., & Cutkosky, M. R. (2002). Fast and Robust: Hexapedal Robots via Shape Deposition Manufacturing. International Journal of Robotics Reseach, 21, 869-882.

Refereed Proceedings

Miller, B., Cartes, D., & Clark, J. E. (in press). Leg Stiffness Adaptation for Running on Unknown Terrains. In IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2013), Tokyo Big Sight, Japan. IEEE. 

Dickson, J., Patel, J., & Clark, J. E. (2013). Towards Maneuverability in Plane with a Dynamic Climbing Platform. In IEEE International Conference on Robotics and Automation (ICRA 2013), Karlsruhe, Germany. IEEE. 

Miller, B., Darnell, A., & Clark, J. E. (2013). Running in the Horizontal Plane with a Multi-Modal Dynamical Robot. In IEEE International Conference on Robotics and Automation (ICRA 2013), Karlsruhe, Germany. IEEE. 

Ordonez, C., Shill, J., Johnson, A., Clark, J. E., & Collins, E. (2013). Terrain Identification for RHex-type Robots. In Proceedings of SPIE, Baltimore, MD. SPIE. 

Dickson, J., & Clark, J. E. (2012). The effect of Sprawl Angle and Wall Inclination on a Bipedal, Dynamic Climbing Platform. In 15th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR 2012), Johns Hopkins University, USA. CLAWAR. 

Fadool, J., Francis, G., Liu, G., DeBrunner, V., & Clark, J. E. (2012). Robotic device for 3D imaging of scour around bridge piles. In Proceedings of ASME International Design Engineering Technical Conferences (IDETC 2012), Chicago, Illinois. ASME. 

Haldane, D. W., & Clark, J. E. (2012). Design of a Variable Stiffness Leg Using Shape Memory Polymer Composites. In 15th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR 2012), Johns Hopkins University, USA. CLAWAR. 

Jun, J., & Clark, J. E. (2012). A Reduced-Order Dynamical Model for Running with Curved Legs. In IEEE International Conference on Robotics and Automation (ICRA), Saint Paul, Minnesota, USA. IEEE. 

Miller, B., Ordonez, C., & Clark, J. E. (2012). Examining the effect of rear leg specialization on dynamic climbing with SCARAB: a dynamic quadrupedal robot for locomotion on vertical and horizontal surfaces. In 13th International Symposium on Experimental Robotics (ISER 2012), Quebec City, Canada. IFRR. 

Newton, J., Hays, M., Clark, J. E., & Oates, W. (2012). Design and Characterization of a Soft Electroactive Adaptive Structure for Legged Robotic Motion. In Proceedings of ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS 2012), Stone Mountain, Georgia. ASME. 

Newton, J., Morton, J., Clark, J. E., & Oates, W. (2012). Modeling and characterization of stiffness controlled robotic legs using dielectric elastomers. In Proceedings of SPIE Vol. 8340. SPIE. 

Ordonez, C., Gupta, N., Collins, E., & Clark, J. E. (2012). Power modeling of the XRL hexapedal robot and its application to energy efficient motion planning. In 15th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines (CLAWAR 2012), Johns Hopkins University, USA. CLAWAR. 

Dickson, J. D., Kulinka, C. M., Martin, M., Yeol, J., & Clark, J. E. (2011). Development and Integration of Adaptive Robotic Multi-Modal Systems (ARM2S). In AIAA in Orlando, FL. AIAA. 

Galloway, K., Clark, J. E., Yim, M., & Koditschek, D. (2011). Experimental Investigations into the Role of Passive Variable Compliant Legs for Dynamic Robotic Locomotion. In IEEE International Conference on Robotics and Automation in Shanghai, China. IEEE. 

Jun, J. Y., & Clark, J. E. (2011). Effect of Rolling on Running Performance. In IEEE International Conference on Robotics and Automation in Shanghai, China. IEEE. 

Jun, J., Haldane, D., & Clark, J. E. (2010). Compliant Leg Shape, Reduced- Order Models and Dynamic Rjavascript:__doPostBack('btnSave|PubRefProceedings|194163','')unning. In International Symposium on Experimental Robotics (ISER) in New Delhi, India. IFRR. 

Miller, B., Andrews, B., & Clark, J. E. (2010). Improved Stability of Running Over Unknown Rough Terrain via Prescribed Energy Removal. In International Symposium on Experimental Robotics (ISER) in New Delhi, India. IFRR. 

Shill, J., Miller, B., Schmitt, J., & Clark, J. E. (2010). Design of a Dynamically Stable Horizontal Plane Runner. In 2010 IEEE International Conference on Robotics and Automation (ICRA) (pp. 4749-4754). Anchorage, AK: IEEE. 

Galloway, K. C., Clark, J. E., & Koditschek, D. E. (2009). Design of a Tunable Stiffness Composite Leg for Dynamic Locomotion. In ASME International Design Engineering Technical Conference (IDETC) (pp. 215-222). San Diego, CA, United States: ASME. 

Jun, J. Y., & Clark, J. E. (2009). Dynamic Stability of Variable Stiffness Running. In International Conference on Robotics and Automation (ICRA) (pp. 3985-3990). Kobe, Japan: IEEE. 

Lynch, G., Clark, J. E., & Koditschek, D. E. (2009). A Self- Exciting Controller for High Speed Vertical Running. In IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) St. Louis, MO. IEEE. 

Sastra, J., Heredia, W. G. B., Clark, J. E., & Yim, M. (2008). Biologically- Inspired Dynamic Legged Locomotion with a Modula Reconfigurable Robot. In Proceedings ASME DSCC in Ann Arbor, MI. ASME. 

Burden, S., Clark, J. E., Weingarten, J., Komsouglu, H., & Koditschek, D. E. (2007). Heterogeneous Leg Stiffness and Roll in Dynamic Running. In IEEE International Conference of Robotics and Automation (ICRA) in Rome, Italy. IEEE. 

Clark, J. E., Goldman, D. G., Lin, P. C., Lynch, G., Chen, T. S., Komsuoglu, H., Full, R. J., & Koditschek, D. E. (2007). Design of a Bio-inspired Dynamical Vertical Climbing Robot. In Robots: Science and Systems in Atlanta, GA. RSS. 

Galloway, K. C., Clark, J. E., & Koditschek, D. E. (2007). Design of a multi-directional variable stiffness leg for dynamic running. In ASME International Mechanical Engineering Congress and Exposition, IMECE 2007 (pp. 73-80). Seattle, WA, United States: ASME. 

Clark, J. E., Goldman, D. I., Chen, T. S., Full, R. J., & Koditschek, D. E. (2006). Towards Vertical Dynamic Climbing. In Proceedings of the 9th International Conference on Climbing and Walking Robots in Brussels, Belgium. CLAWAR. 

Clark, J. E., & Cutkosky, M. R. (2005). Stability Measure Comparison for the Design of a Dynamic Running Robot. In 8th International Conference on Climbing and Walking Robots in London, England. CLAWAR 2005. 

Clark, J. E., Provancher, M. R., & and Mitiguy, P. (2005). Theory, Simulation, and Hardware: Lab Design for an Integrated System Dynamics Education. In Proceedings ASME IMECE in Orlando Florida. ASME. 

Clark, J. E., Kim, S., & Cutkosky, M. R. (2004). iSprawl: Autonomy, and the Effects of Power Transmission. In 7th International Conference on Climbing and Walking Robots in Madrid, Spain. CLAWAR 2004. 

Clark, J. E., Provancher, W. R., Geisler, B., & Cutkosky, M. R. (2004). Toward Penetration- Based Clawed Climbing. In 7th International Conference on Climbing and Walking Robots in Madrid, Spain. CLAWAR 2004. 

Clark, J. E., Thelen, D. G., & Cutkosky, M. R. (2004). Dynamic Simulation and Analysis of a Passively Self- Stabilizing Hexapedal Running Robot. In Proceedings ASME IMECE in Anaheim, CA. ASME. 

Clark, J. E., Cham, J. G., Bailey, S. A., Froelich, E., Nahata, P. K., Full, R. J., & Cutkosky, M. R. (2001). Biomimetic Design and Fabrication of a Hexapedal Running Robto. In International Conference Robotics and Automation in Seoul, Korea. ICRA2001. 

Clark, J. E., Cham, J. G., Karpick, J., & Cutkosky, M. R. (2001). Stride Period Adaptation for ABiomimetic Running Hexapod. In 10th International Symposium of Robotics Research in Lorne, Bictoria, Australia. International Symposium of Robotics Research. 

Clark, J. E., Xia, L., & Cutkosky, M. R. (2001). An Interactive Aid for Desiging and Planning Heterogeneous Layered Prototypes. In ASME DETC 2001 in Pittsburg, PA. ASME. 

Presentations

Invited Papers at Symposia

Clark, J. E. (presented 2005, May). A spring assisted one degree of freedom climbing model. In Symposium of Fast Motions in Biomechanics and Robotics. Symposium conducted at the meeting of SFMBR, Heidelberg Germany. (International)

Refereed Papers at Conferences

Clark, J. E. (presented 2013, November). Leg Stiffness Adaptation for Running on Unknown Terrains. Paper presented at International Conference on Intelligent Robots and Systems, IEEE, Tokyo Big Sight, Japan. (International)

Clark, J. E. (presented 2013, May). Running in the Horizontal Plane with a Multi-Modal Dynamical Robot. Paper presented at International Conference on Robotics and Automation, IEEE, Karlsruhe, Germany. (International)

Clark, J. E. (presented 2013, May). Towards Maneuverability in Plane with a Dynamic Climbing Platform. Paper presented at Internation Conference on Robotics and Automation, IEEE, Karlsruhe Germany. (International)

Clark, J. E. (presented 2012, August). Robotic device for 3D imaging of scour around bridge piles. Paper presented at ASME International Design Engineering Technical Conferences, ASME, Chicago, Illinois. (International)

Clark, J. E. (presented 2012, June). Examining the effect of rear leg specialization and dynamic climbing with SCARAB, a dynamic quadrupedal robot for locomotion on vertical and horizontal surfaces. Paper presented at 13th International Symposium on Experimental Robotics, ISER, Quebec City, Canada. (International)

Clark, J. E. (presented 2012, May). A Reduced-Order Dynamical Model for Running with Curved Legs. Paper presented at International Conference on Robotics and Automation, IEEE, St. Paul, Minnesota. (International)

Clark, J. E. (presented 2010, December). Compliant Leg Shape, Reduced-Order Models and Dynamic Running. Paper presented at Annual Conference, ISER, New Delhi, India. (International)

Clark, J. E. (presented 2010, December). Improved Stability of Running Over Unknown Rough Terrain via Prescribed Energy Removal. Paper presented at Annual Conference, ISER, New Delhi, India. (International)

Clark, J. E. (presented 2009). A Self Exciting Controller High Speed Vertical Running. Paper presented at International Conference on Intelligent Robots and Systems, IEE, St. Louis, MO. (International)

Clark, J. E. (presented 2009). Design of Tunable Stiffness Composite Leg for Dynamic Locomotion. Paper presented at IDETC, ASME, San Diego, California. (International)

Clark, J. E. (presented 2008). Biologically Inspired Dynamic Legged Locomotion with a Modular Reconfigurable Robot. Paper presented at Annual Conference, ASME, Ann Arbor Michigan. (International)

Clark, J. E. (presented 2007). A Physical Model for Dynamical Arthropod Running on Level Ground. Paper presented at International Symposium on Experimental Robots- Annual, ISER, Athen Greece. (International)

Clark, J. E. (presented 2007). Design of a bio-inspired Dynamical Vertical Climbing Robot. Paper presented at Roberts: Science, and Systems, ISER, Atlanta, GA. (International)

Clark, J. E. (presented 2006). Towards Vertical Dynamic Climbing. Paper presented at International Conference on Climbing and Walking Robots, ICCWR, Brussels, Belgium. (International)

Clark, J. E. (presented 2005). Stability Measure Comparison for the Design of a Dynamic Running Robot. Paper presented at 8th International Conference on Climbing and Walking Robots, CLAWAR, London England. (International)

Clark, J. E. (presented 2005). Theory, Stimulation, and Hardware: Lab Design for an Integrated Systems Dynamics Education. Paper presented at IDETC, ASME, Orlando, FL. (International)

Clark, J. E. (presented 2004). Dynamic Simulation and Analysis of a Passively Self-Stabilizing Hexapedal Running Robot. Paper presented at ASME IMECE, ASME, Anaheim California. (International)

Clark, J. E. (presented 2004). iSprawl: Autonomy and the Effects of Power Transmission. Paper presented at 7th Internationa Conference on Climbing and Walking Robots, ICCWR, Madrid Spain. (International)

Clark, J. E. (presented 2004). Toward Penetration based Clawed Climbing. Paper presented at 7th International Conference on Climbing and Walking, ICCWR, Madrid Spain. (International)

Invited Keynote and Plenary Presentations at Symposia

Clark, J. E. (presented 2012, November). Design of Dynamic Multi-Modal Legged Locomotors for Challenging Environments. Keynote presentation in Future Intelligent deseT (FIT). Symposium conducted at the meeting of IEEE/IET, Shanghai, China. (International)

Patented Inventions

Galloway, K. C., Clark, J. E., & Koditschek, D. E. (submitted). Variable Stiffness Leg Structure For Multipede Running Robots. 

Oates, W. S., Clark, J. E., & Farrukh, A. S. (submitted). High Frequency Pulsed Microjet Actuation. 

Johnson, S., Desai, I., Lambert, D., Clark, J. E., & Reese, J. (2003). FOB command mechanization. 

Clark, Jonathan, Desai, Tejas, Johnson, Susan, Lambert, Debbie Marie, Reese, & Jeralyn. (2000). Key fob with valet and car locator feature. 

Contracts and Grants

Contracts and Grants Funded

Clark, J. E. (Feb 2013–May 2013). Space Hex - NASA RASC-AL Robo-Ops Finalist. Funded by NASA. Total award $10,000. 

Clark, Jonathan E (PI). (Nov 2012–Nov 2013). 2013 NASA RASC-AL Robo-Ops Competition. Funded by University of Central Florida. (UCF01-0000260428). Total award $1,000. 

Clark, Jonathan E (PI). (Aug 2012–Aug 2014). Utilizing Smart Materials For Miniature Multi-Modal Dynamic Robots. Funded by Central Intelligency Agency. (2012-12062700008). Total award $239,941. 

Collins, Emmanuel G (PI), Clark, J. E., & Oates, W. (2012–2014). Robotics Collaborative Technology Alliance. Funded by General Dynamics. (2013-01020). Total award $677,237. 

Clark, Jonathan E (PI), Collins, E. G., Shih, C., Alvi, F. S., Oates, W., & Englander, O. (Aug 2010–Aug 2011). Adaptive Robotic Multi-Modal Systems (ARM2S). Funded by Air Force Research Laboratory. Total award $143,114. 

Clark, Jonathan E (PI). (Feb 2010–May 2010). PROficiency in and Appreciation of Mathematics and Scien. Funded by Leon County School Board. Total award $15,000. 

Collins, Emmanuel G (PI), Clark, J. E., & Oates, W. (2010–2012). Robotics Collaborative Technology Alliance. Funded by General Dynamics. Total award $650,263. 

Clark, Jonathan E (PI). (Jan 2009–Dec 2011). From Unstable Standing to Stable Walking. Funded by Proctor & Gamble Company. Total award $9,906. 

Clark, Jonathan E (PI). (Nov 2008–May 2009). RIMS at NIMS. Funded by Leon County School Board. Total award $16,000. 

Clark, Jonathan E. (PI), & Oates, W. W. (Oct 2008–Aug 2010). Biosynthesis of Aerodynamic Microsystems and Structures. Funded by Florida Center for Advanced Aero Propulsion. Total award $117,000. 

Clark, Jonathan E (PI). (Sep 2008–Aug 2012). Collaborative Research: Dynamics of Running on Variable Inclines. Funded by National Science Foundation. (08216137). Total award $121,802. 

Clark, Jonathan E. (PI). (May 2008–Aug 2008). Survey of robotic approaches on climbing. Funded by Johns Hopkins. Total award $34,998. 

Clark, J. E. (2008–2008). Bridging the Model/Reality Gap for Dynamic Legged Robots. Funded by FSU. Total award $16,000. 

Contracts and Grants Pending

Collins, E., & Clark, J. E. (Oct 2013). Improved Maneuverability and Autonomy for Legged Robots Through Modeling, Motion Planning, and Leg Design. Submitted to National Science Foundation. 

Clark, J. E. (Jul 2013). CAREER: Rotational Dynamics for Improved Running and Climbing. Submitted to National Science Foundation. 

Postdoctoral Supervision

Miller, B. (Aug 2013–Aug 2015). 

Service

Florida State University

FSU University Service

Faculty Mentor, Young Scholars Program (2012–2013).

Faculty Mentor, Robotics Club (2008–2013).

FSU College Service

Member, Web site development review panel (2009).

FSU Department Service

Member, Undergraduate Curriculum Committee (2011–2013).

Member and Chair, Lab and Space Committee (2007–2013).

Coordinator, Graduate Seminar (2008–2012).

The Profession

Guest Reviewer for Refereed Journals

Proceedings of the National Academy of Sciences (2013).

Bioinspiration & Biomimetics (2009–2013).

ASME Journal of Mechanisms and Robotics (2012).

Journal of the Royal Society - Interface (2012).

IEEE Transaction on Robotics (2009–2012).

International Journal of Robotics Research (2008–2012).

Autonomous Robotics (2011).

Journal of Theoretical Biology (2011).

IEEE Transaction on Mechatronics (2010–2011).

IEEE Spectrum (2009–2010).

ASME Journal Mechanism Design (2009).

Journal of Field Robotics (2007).

Journal of Dynamic Systems, Measurement, and Controls (2006).

Reviewer or Panelist for Grant Applications

National Science Foundation (2010–2012).

Service to Professional Associations

Co-Chair, Florida Conference on Recent Advances in Robotics (FCRAR) (2013).

Associate Editor, IEEE/RSJ International Conference on Intelligent Robots and Systems (2013).

Program Committee Member, Robotics Systems and Science (2010).

Member, Robotics Technical Committee, ASME Dynamic Systems and Controls Committee (2008–2010).

The Community

Co-organizer, Saturday workshops and lab tours, Challenger Learning Center (2011–2013).

Organizer, K-12 Outreach including presentations and student mentoring of students in robotics at local schools. PI for RIMS at NIMS and PROAMS, K-12 Robotics Outreach (2009–2013).

Co-coordinator, ME2 Outreach program of monthly presentations to youth in the community, Mary Brogen Museum for Art and Science (2010–2012).